# Toolbar and Menu

In the Rhino user interface, we can run RhinoArtisan in three ways, just like in Rhino: Menu, Toolbar or by Command Prompt

<figure><img src="https://content.gitbook.com/content/ZRKYoG52Iya7SMaKpyUz/blobs/2jfm7cBYZzvWwNQSuvd9/image.png" alt=""><figcaption></figcaption></figure>

### Menu

A new menu will appear in Rhino with the name Artisan.

<figure><img src="https://content.gitbook.com/content/ZRKYoG52Iya7SMaKpyUz/blobs/UExL5CIFQ0x92XOBVEMW/image.png" alt=""><figcaption></figcaption></figure>

### Toolbar

When RhinoArtisan is installed, the toolbar will also appear. As in any other Rhino toolbar, we can see that some icons have a small triangle at the bottom right, it will open a new toolbar.

<figure><img src="https://content.gitbook.com/content/ZRKYoG52Iya7SMaKpyUz/blobs/MHy8MygnO29vtDExEG27/image%206.png" alt=""><figcaption></figcaption></figure>

### Commands

All RhinoArtisan tools are available at the command prompt. All commands start with Artisan.

<figure><img src="https://content.gitbook.com/content/ZRKYoG52Iya7SMaKpyUz/blobs/IMLtxs0gCC7d2sNv9uET/image.png" alt=""><figcaption></figcaption></figure>